Product Category
Please chooseFor a better view please rotate your device in landscape mode
Data Sheet
CuZn39Pb3 acc. to DIN EN 12164-12168/12420/12449/1652 (CW614N)
Material
Composition in %
Density around g/cm3
Mech, Properties
Tensile Strength Rm (Mpa)
Yield Point Rp 0.2 (Mpa)
Elongation A (%)
CuZn39Pb3
Cu 57.7-59.0 Pb 2.5-3.5 Zn Rest
8.4
M R360 R430
Min, 360 Min, 430
Max, 320 Min, 220
Min, 20 Min, 10
Characteristics:Most common alloy for machining, good hot-forming properties.
Use:Most common alloy for the machining on automatic lathes, turned parts of all kinds.
Remark:Very good machinability.
CuZn37 acc. to DIN EN 12163-12167/12420/12449/1652 (CW508L)
Material
Composition in %
Density around g/cm3
Mech, Properties
Tensile Strength Rm (Mpa)
Yield Point Rp 0.2 (Mpa)
Elongation A (%)
CuZn37
Cu 62.0-64.0 Zn Rest
8.4
WH R350
350-440
Min, 19
Characteristics:Most common alloy for cold forming, good solderability and weldability.
Use:Screws, printing cylinder, leaf springs, radiator strips.
Remark:Moderate machinability.
CuZn40Pb2 acc. to DIN EN 12164-12168/12420/12449/1652 (CW617N)
Material
Composition in %
Density around g/cm3
Mech, Properties
Tensile Strength Rm (Mpa)
Yield Point Rp 0.2 (Mpa)
Elongation A (%)
CuZn40Pb2
Cu 57-59.0 Pb 1.5-2.5 Zn Rest
8.4
M R360 R430
Min, 360 Min, 430
Max, 320 Min, 220
Min, 20 Min, 10
Characteristics:Alloy for all machining processes.
Use:Very good machinability.
CuZn43Pb2Al DIN EN 12167 (CW624N)
Material
Composition in %
Density around g/cm3
Mech, Properties
Tensile Strength Rm (Mpa)
Yield Point Rp 0.2 (Mpa)
Elongation A (%)
CuZn43 Pb2Al
Cu 55-57 Al 0.05-0.5 Pb 1.6-3.0 Zn Rest
8.4
gepresst
Characteristics:Brass hand rails, Angle-, T- and U-Profiles.
Use:Very good machinability.
CuZn37Mn3Al2PbSi acc. to DIN EN 12164-12168/12420/12449/1652 (CW713R)
Material
Composition in %
Density around g/cm3
Mech, Properties
Tensile Strength Rm (Mpa)
Yield Point Rp 0.2 (Mpa)
Elongation A (%)
CuZn37Mn3Al2PbSi
Cu 57.0-59.0 Mn 1.5-3.0 Al 1.3-2.3 Pb 0.2-0.8 Si 0.3-1.3
8.1
M R540 R590
540 590
280 370
15 10
Characteristics:High-wear resistance, good hot-forming properties. High strength properties and good corrosion resistance.
Use:Construction parts in the mechanical engineering sector, synchronizer rings, valve guides, plain bearings.
Remark:Moderate to medium machinability, strength-dependent.
Find a contact person
You would like to order or have questions about our products?
Our sales team is at your disposal, whether by phone or e-mail.
Enter a German postcode here and find a regional contact person.
If you want to use Google Maps, you must agree to the use of scripts obtained from Google servers. To do this, give your consent via the cookie banner of this website.