Turning The turning production area uses state-of-the-art CNC/NC technology to produce turned parts according to DIN ISO 4379 and individual customer drawings in all common non-ferrous metal alloys. Brohler Metall mainly turns copper alloys, such as bronze (CC493K and CC483K), aluminium bronze (CC333G), brass (CW614N) and many other non-ferrous alloys. At Beyer CNC, on the other hand, the focus is on the wide range of aluminium materials. In addition, components made of brass (CW614N), grey cast iron (GG/GGG) and various types of steel/stainless steel can of course also be supplied. NC and CNC machining up to ø 800 mm. Conventional processing over ø 2,000 mm.

You can also benefit from the products of Brohler Metall

Bearing In addition to rolling bearings, plain bearings are the most commonly used bearing designs in mechanical and equipment engineering. When components move relative to each other, plain bearings should guide them with little friction as possible, wear-free and with the greatest possible accuracy. The fact that plain bearings can also be produced in split design considerably simplifies mounting and dismounting for the user.

Guide bearings CNC milled parts made of copper alloys are typically used as guide rails in general mechanical engineering due to their special properties.

Solid lubricant bearings and guide rails, maintenance free and safe ... (MaFeBro Maintenance-Free Bronze) With MaFeBro you get maintenance-free bronze bearings and guide rails. These are products in different bronze alloys with dot-shaped embedded graphite inserts.

Dry sliding bearings according to DIN ISO 3547-2 (DIN 1494) Dry sliding bearings according to DIN ISO 3547-2 consist of a tin-plated steel back with sintered bronze and PTFE-coated sliding surface. They are intended for use in rotary and longitudinal movements. Dry sliding bearings are characterised by a low coefficient of friction, good sliding properties and low wear.

Sintered bronze bearings Sintered bronze bearings are a variant of sliding bearings made of porous bronze and are self-lubricating and largely maintenance-free due to subsequent oil impregnation. Sintered metals are produced by pressing metal powder under high pressure. The advantage over solid plain bearings is that sintered metal has open pores, so that these pores fill with lubricants (for example oils).

Milling
Beyer CNC mainly mills aluminium alloys and other non-ferrous metals, as well as FE metals. Milling of X 3,000 mm x Y 800 mm x Z 800 mm.

Using various vertical machining centres of the Mazak brand: Traverse path From: X=1,050, Y=530, Z=510 To: X=1,740, Y=760, Z=660

as well as horizontal machining centres of the Mori Seiki brand: Traverse path 2 pallets 400x400

Tapping
Beyer CNC specialises in the manufacture of hydraulic, valve and control blocks, as well as adapters. You can choose from all common aluminium materials, including of course the more modern, RoHS-compliant, lead-free grades. These components are also available in grey cast iron or steel. For the technical challenges of various valve manufacturers we have a very large selection of cavity forming tools at our disposal. In total, the Beyer CNC can call on more than 800 different tools (forming tools, drills, milling cutters, etc.), starting from a size of 1 mm diameter. We look forward to your inquiry!